MADRIX Forum

Hi Alex_V, Welcome to the MADRIX Forum. You can use incoming DMX signals for remote control or you can route the DMX signals through MADRIX 5 to your output (DMX-Thru). You can monitor incoming values using the "DMX Watcher" (navigate to 'Tools' > 'DMX Watcher...' > 'Input'). Please note t...

Hi Quinton, I think the easiest way would be to use Fixture Groups and two "Group Presets" (one with intensity = 255 and the other one with intensity = 0). That means for the "ON"-Cue you will need to use the Group Preset with intensity = 255 and for the "OFF"-Cue you w...

Hi Dingken,

Yes, please send us an e-mail to info[at]madrix[dot]com!

Hi Quinton, Sorry for the delay! How do you call the Storage Places? Manually or do you use remote control? You can create a Cue List containing two Cues with a Time Code (without duration), which are responsible for the ON and OFF times. As Time Code source you can use "System Time". If y...

Hallo marshmellow,

Ja, mit einem MADRIX 5 Macro ist dies möglich.

Falls du Fragen dazu hast, schreib uns gern eine E-Mail an info[at]madrix[dot]com.

Hi Quinton,

You can turn on/off the daylight saving time with the following command: to turn it off to turn it on

We can't come up with the list, since it could change with every new firmware version.

Hi webcentrik,

Are you using the latest MADRIX AURA firmware? The latest firmware version is 1.16.7447.

Hi dan_StudioRRD, If you set a "Storage Place Description" in MADRIX 5 (edit field right above the Storage Places), you can retrieve it with the following function: GetStoragePlaceDescription=S1P1 * In this example the description of Storage 1 Place 1 is retrieved. * There is no "Set&...

Hi Quinton, Yes, this is also possible using the following command: http://[IP]/timerdetails.cgi?index=[timer_index]&enable=[value]&submit=Ok * [timer_index] is the list index, thus "1" is the first timer * [value] can be either "n" (timer disabled) or "y" (time...

Hello FX_lighting,

The MADRIX 5 demo mode doesn't feature data output (apart from the highlight function in the Device Manager).
Thus you will need a MADRIX KEY and a MADRIX 5 license in order to send data to the interface.